The use of I-beam production lines in welding operations is becoming more and more unusual. Therefore, the accurate use of H-beam production lines is a special problem. The use of brilliant habits can not only travel the life span, but also produce the same output. The solution makes the product more sophisticated and perfect. Therefore, the I-beam production line must deliberately dominate, and pay attention to what it is right?

　　Let us recommend the H-beam production line based on the difference in the accuracy of the H-beam production line (filtering out intrusive impurities). The thick H-beam production line, the general H-beam production line, the thin H-beam production line and four thin The H-beam production line equipment can filter out impurities above 100 microns, 10-100 microns, 5-10 microns, and 1-5 microns. Note: When selecting the oil filter, the following points should be considered. The accuracy of the I-beam production line should meet the savings requirements.

　　It is only adjusted if there is a satisfying activity for a long time. The filter element satisfies the constancy, and the I-beam will not be damaged by hydraulic pressure. The filter element has excellent corrosion resistance and can be used for long periods under temperature. The filter element is simple to clean or transform.
　　Therefore, the filter should be selected according to the technical requirements of the hydraulic system, the accuracy of the H-beam production line, the flow of talents, the professional pressure, the oil viscosity, and the professional temperature.